Marquee Pumpkins

IMG_0400

IMG_0400

I love pumpkins and I love marquees....so why not put them together I say!   These pumpkins light up and are the perfect way to say welcome to any guests.  Customize them with your family name, your kids names, or, well, anything really.

MATERIALSFoam carveable pumpkinsCraft paintLED Glass Ball lights (battery operated)DrillPencilUtility knife

Here are the lights your looking for.  I found these at Michael's Arts and Crafts.

IMG_3387

IMG_3387

STEPS:

Outline your letters on your pumpkins.  I found the easiest way is to print the letters on a piece of paper, cut them out, and trace them onto the pumpkin. If your feeling wild and crazy though, freehand is always an option.

IMG_5186

IMG_5186

Paint the letter your base color. Then go back and outline a second letter about a quarter of an inch inside your base letter. This you can totally free hand.

IMG_5189

IMG_5189

Paint your interior letter your accent color.

IMG_5190

IMG_5190

With a pencil, mark where you want your lights to go. Once you’re happy with the spacing use a small drillbit to start the hole, then go back with a 1/4“ inch drill bit and make the holes bigger. Starting with the smaller bit helps with more accurate placement as the larger bit tends to slide around on the pumpkin surface.

IMG_5193

IMG_5193

Use the utility knife to cut an opening in the top of the pumpkin.

IMG_5192

IMG_5192

Place the bunch of lights inside the pumpkin.  Carefully bend the wire around each bulb and slip the bulb through the pre-drilled holes.

IMG_5194

IMG_5194

Once through the hole place the bubble cover and stop or back over the bulb.

IMG_5196

IMG_5196

Slide the bulb into the pumpkin hole.

IMG_5197

IMG_5197

Add your batteries and give the Vegas Strip a run for its money!

image1 (18)

image1 (18)